Knowledge / Hands-on project

CCSDS telemetry on ESP32 + COSMOS ground station

Not started

Hands-on hardware project

Stream MPU6050 data as CCSDS Space Packets and decode/graph them in OpenC3 COSMOS.

Practice in the Flight Lab: Build a Space Packet · Decode the downlink · Arm the limit monitor

Subareas

Space Packet headersAPIDs & sequence countsCRCCOSMOS cmd/tlm definitionsSerial/UDP interfacesLimits

Steps & what each needs

  1. Done when: ESP32 emits CCSDS packets
  2. Done when: COSMOS decodes, graphs, and applies red limits
  3. Done when: Sequence-count gap detector
  4. Done when: 2 commands (set sample rate, reset) with ack
  5. Done when: Packet ICD table in README

Resources

← All knowledge